HIKVISION DS-K3B530X Series - 7.3 Configuration

Steps
1.
Click Conguraon → Turnsle → Basic Sengs to enter the page.
2.
View the Device Type, Device Model and Working Status.
3.
Set Barrier Material, Lane Width, Barrier Height, Barrier Opening Speed and Barrier Closing
Speed.
4.
Set the passing mode.
-
If you choose General Passing, you can select the barrier status for the entrance and exit from
the drop-down list.
Note
If you set barrier-free mode, the barrier remains open and will close when authencaon
fails.
-
If you choose Weekly Schedule, you can set a weekly schedule for entrance and exit barriers.
5.
Click Save.
keyfob
Set keyfob patameters.
Steps
1.
Click
Conguraon → Turnsle → Keyfob to enter the page.
Figure 6-13 keyfob
2.
Set Working Mode as One-to-One or One-to-Many.
3.
Add keyfob.
1) Click Add and the keyfob adding window will pop up.
2) Enter the Name and Serial No..
3) Check to enable Remain Open Permission at your actual needs.
4) Click OK to add the keyfob.
DS-K3B530X Series Swing Barrier User Manual
60