HIKVISION DS-K3B530X Series - Page 73

4.
Oponal: Select a keyfob and click Delete to delete the keyfob.
5.
Click Save.
IR Detector
Set IR detector.
Steps
1.
Click Conguraon → Turnsle → IR Detector to enter the page.
Figure 6-14 IR Detector
2.
Set the entrance and exit inducve mode as Single Triggered or Triggered Simultaneously.
3.
Set custom IR detector mode.
Enable IR Emergency Mode
If some IR beams do not work properly, you can shield those IR beams to restore the lane. But
this
acon may hit person and cause injury.
Enable Custom An-pinch for Door Closing
An-pinch for door closing refers that the barrier will not close if the device has detected
person in the lane. Only aer the person walks out of the lane, the barrier will close. If you
enable the
funcon, you can shield parts of the IR beams for closing barrier in advance. But
this acon may hit person and cause injury.
4.
Click Save.
People
Counng
Set people counng .
Steps
1.
Click Conguraon → Turnsle → People Counng to enter the page.
DS-K3B530X Series Swing Barrier User Manual
61