HIKVISION DS-K3B530X Series - Set Privacy Parameters; Prompt Schedule

M1 card encrypon can improve the security level of authencaon.
Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is
recommended to encrypt sector 13.
Enable EM Card
Enable EM card and authencang by presenng EM card is available.
Note
If the peripheral card reader supports presenng EM card, the funcon is also supported to
enable/disable the EM card funcon.
Enable CPU Card
Enable CPU card and authencang by presenng CPU card is available.
CPU Card Read Content
Aer enable the CPU card content reading funcon, the device can read the CPU card content.
Enable FeliCa Card
The device can read the data from FeliCa card when enabling the FeliCa card funcon.
Set Card
Authencaon Parameters
Set the card reading content when authencate via card on the device.
Go to Conguraon → Card Sengs → Card NO. Authencaon Sengs .
Select a card
authencaon mode and enable reversed card No. at your actual needs. Click Save.
6.5.13 Set Privacy Parameters
Set the event storage type.
Go to
Conguraon → Security → Privacy Sengs
The event storage type is overwring by default. The earliest 5% events will be deleted when the
system detects the stored events has been over 95% of the full space.
6.5.14 Prompt Schedule
Customize the output audio content when authencaon succeeded and failed.
Steps
1.
Click Conguraon → Preference → Prompt Schedule .
DS-K3B530X Series Swing Barrier User Manual
64