HIKVISION DS-K3Y501SX Series - Appendix B. DIP Switch; DIP Switch Description; DIP Switch Corresponded Functions

Appendix B. DIP Switch
B.1 DIP Switch Descripon
The DIP switch is on the main lane control board. No.1 to No 8 is from the low bit to the high bit.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is o. If you
set the DIP switch like the gure displayed below, its binary value is 00001100, and its decimal
value is 12.
B.2 DIP Switch Corresponded
Funcons
Note
Aer seng the DIP switch, you should reboot the device, or the funcon cannot take eect.
The 8-bit DIP switch corresponded funcons on the access control board are as follows:
Bit
Device Mode Funcon Decimal Value Binary Value
1 to 2 Work Mode Normal Mode 0
Test Mode 2
3 Memory Mode Enable Memory
Mode
0
Disable Memory
Mode
1
DS-K3Y501SX Series Flap Barrier Quick Start Guide
34