Video Intercom Master Station·Quick Start Guide
11
Figure 2-9 Door Station Adding Interface
5. Press the tab on the upper left corner of the dialogue box.
After adding door station successfully, you can get the live view of door station and
outer door station in the Live View interface.
2.5 Calling Resident
Steps:
1. Press the tab on the touch screen to enter the residents calling
interface.
2. Enter the corresponding resident’s Room No..
3. Press the tab to start a video intercom call.
4. Press the tab to stop the video intercom call.
The room No. format should be like 1-1-1-102 as Community 1, Building 1, Unit 1, and
Room 102. The community No. can be omitted.
Switch to on the upper right corner to enable the camera function.
To Next Page
Loading...
