Panic Alarm Master Station • User Manual
32
Tap to enter the System Maintenance page.
Tap SD Card Management to enter the SD card management page.
SD Card Management Page
Format SD Card: You can format the SD card. Tap in the Format SD Card line to pop up a window, you can
select OK to format the SD card or select Cancel to cancel the operation.
Project Configuration
Editing Project Password
Steps:
On the home page of master station, click System Config to enter the system configuration page.
Tap and enter the project password in the pop-up window to enter the project page.
Note: The default project password is 888999. You can enter the project page to change the project
password. For detailed settings, please see 3.7.1 Editing Project Password.
The default project password is only for the first login. To eliminate security risks, please be sure to change the
project password after the first login, in order to prevent unauthorized login to your device or other adverse
consequences.
On the project page, click Password Settings to edit the password.
To Next Page
Loading...
