Panic Alarm Master Station • User Manual
34
IO Input Settings Page
Zone No.: The zone number of the zone needs to be configured.
Zone Name: By default, it is Alarm In. The zone name ranges in length from 1 to 32 characters.
Zone Type: You are able to select the zone as Instant Zone, Fire Zone, 24H Silent Zone or Disabled Zone. By
default, it is Disabled Zone.
Link Device I/O Output: By default, it is None. The link device I/O output supports multiple choice.
Link Audio File: By default, it is None. You are able to select the link audio file in the pop-up Audio File
window.
Copy to: You can click Copy to… to copy the parameters to other zones.
Configuring Alarm Linkage
Purpose:
If the master station connects external alarm output device, you are able to configure the linkage IO outputs of
the panic alarm, consultation, hubbub alarm and master station call. When the alarm device initiates a panic
alarm call, consultation, triggers a hubbub alarm, or receiving a master station call, the linked alarm output will
respond.
Steps:
On the project page, click Alarm Settings, and click in the Alarm Linkage line to enter the page.
To Next Page
Loading...
