Panic Alarm Master Station • User Manual
51
Time Configuration
Editing Time Zone
Purpose:
You are able to synchronize the time to the selected time zone.
Steps:
Select a time zone from the drop-down box.
Click Synchronization, and click save.
Enable NTP
Purpose:
You are able to enable NTP to enable automatic synchronization, which periodically synchronizes time from the
NTP server based on the synchronization interval.
Steps:
Check Enable NTP.
Enter the IP address or domain name, port number of the NTP server, and set the synchronization interval.
Server Address/Domain Name: IP address or domain name of the NTP server. By default, it is 0.0.0.0. Domain
names range in length from 0 to 64 characters.
NTP Port: The default value is 123, the available NTP port number is between 1 and 65535.
Sync Interval: The default value is 60 min, the available interval is between 1 and 10080 min.
Click Test. Test whether the connection is successful to the NTP server.
Click Save.
To Next Page
Loading...
