Panic Alarm Master Station • User Manual
59
Select a camera from the drop-down box to configure the display parameters of the camera, including display
position, display format and optional display content, you are able to add custom display information.
− Editing the display position
Drag the blue box on the live view page to change the position of the display information, click Save, and
then the position of the display information will be updated.
− Editing the display format
Date Format: Select the display format of the date in the Date Format Drop-Down box.
Time Format: Select the Time Format as 24-hour or 12-hour.
OSD Format: Select the OSD Format as Transparent & Flashing, Transparent & Not Flashing, Non-
Transparent & Flashing or Non-Transparent & Not Flashing.
− Editing the display content
You are able to select the display content optionally, edit the camera name, and add the custom display
content.
- Selecting the display content
According to your requirement, select and check Display Camera Name, Display Date, Display Week to
display the selected display content.
- Editing the camera name
Editing the camera name in the Camera Name textbox.
- Adding custom display content
Click the right area of the check box in the Text Overlay List and enter display content in the textbox.
Check and click Save to display the custom information.
Click Save.
Optional: Click Copy to… to copy the display configuration to other camera.
Configuring the Video Parameters
Steps:
On the remote configuration page, click Image – Image Settings to enter the page.
Select a camera to configure the video parameters, including brightness, contrast, saturation and hue.
Slide the slider or click the adjustment bar to edit the video parameters.
Notes:
The value of video parameters ranges from 1 to 10.
By default, the brightness is 7, the contrast is 1, the saturation is 5, the hue is 6.
Optional: Click Default Value to restore all video parameters to default.
To Next Page
Loading...
