Panic Alarm Master Station • User Manual
61
Notes:
Supported Audio file format: .mp3 and .wav. The file name can’t contain spaces at the beginning and
end. The length of the file name should be not more than 31, and the file name should not contain
symbols: ?\/*”<>|.
Each audio file size up to 2MB.
An audio file will be overwritten if uploading an audio file with the same name.
Steps:
On the audio file page, click Browse to select the audio file (can be selected in batch).
Check the audio file in the Upload File list and click Upload.
Deleting the SD Card Audio File
Purpose:
In this section, you are able to delete audio files in SD card which has audio files.
Steps:
On the Audio File page, click Refresh to display the SD card audio file in the File List.
Check the audio file needs to be deleted, click Delete.
Notes:
You can select and check audio file in batch.
After the audio file is deleted, the function using this audio file will restore the default audio file
configuration.
Configuring Camera parameters
Purpose:
In this section, you are able to configure the camera of the master station and the corresponding video standard.
Configuring Camera
On the remote configuration page, click CCD - Video Parameters to select the camera from the drop-down box.
Click Save to save the setting.
Configuring Video Standard
Steps:
On the remote configuration page, click Browse – Other to enter the page.
Select the camera from the drop-down box.
Select PAL (50HZ) or NTSC (60HZ) from the Video Standard drop-down box.
Click Save.
To Next Page
Loading...
