HIKVISION DS-TCP440-DB - Chapter 4 Capture Configuration; Set Capture Parameters; Set Vehicle Feature Parameters; Set Image Encoding Parameters

Parking Camera User Manual
6
Chapter 4 Capture Configuration
4.1 Set Capture Parameters
4.1.1 Set Vehicle Feature Parameters
Set vehicle feature parameters when you need to detect the passing vehicle features.
Steps
1. Go to Configuration → Device Configuration → Capture Parameters → Vehicle Feature.
Figure 4-1 Set Vehicle Feature Parameters
2. Check the vehicle features to be detected.
3. Click Save.
4.1.2 Set Image Encoding Parameters
If the captured pictures are not clear, set the resolution of the captured pictures and the picture
size.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → Image Encoding.
Figure 4-2 Set Image Encoding Parameters
2. Select Capture Resolution.
3. Enter JPEG Picture Size.
4. Click Save.