Parking Camera User Manual
18
Chapter 6 Live View and Local Configuration
6.1 Live View
6.1.1 Start/Stop Live View
Click to start live view. Click to stop live view.
6.1.2 Select Image Display Mode
Click to display the image in 4:3/16:9/original/self-adaptive display mode.
6.1.3 Select Stream Type
Click / / to select the stream type. It is recommended to select the main
stream to get the high-quality image when the network condition is good, and select the
sub-stream to get the fluent image when the network condition is not good enough. The third
stream is the custom stream.
Note
The supported stream types vary with different models. The actual device prevails.
6.1.4 Switch Lens
For the dual-lens camera, select to switch the lens.
6.1.5 Capture Picture Manually
You can capture pictures manually on the live view image and save them to the computer.
Steps
1. Click to start live view.
2. Click to capture a picture.
3. Optional: Click Configuration → Local Configuration to view the saving path of snapshots in live
view.
To Next Page
Loading...