Parking Camera User Manual
28
too high, trailing may appear.
2D DNR
The higher the 2D DNR Level is, the stronger the noise will be reduced. But if it is too high,
the image may become fuzzy.
8.3 Set ROI
ROI (Region of Interest) encoding helps to assign more encoding resources to the region of interest,
thus to increase the quality of the ROI whereas the background information is less focused.
Before You Start
Please check the video encoding type. ROI is supported when the video encoding type is H.264 or
H.265.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → ROI.
Figure 8-3 Set ROI
2. Select Stream Type.
3. Set ROI region.
To Next Page
Loading...