Parking Camera User Manual
29
1) Check Enable.
2) Select Area Code.
3) Click Draw Area.
4) Drag the mouse on the live view image to draw the fixed area.
5) Select the fixed area that needs to be adjusted and drag the mouse to adjust its position.
6) Click Stop Drawing.
4. Enter Area Name and select ROI Level.
Note
The higher the ROI level is, the clearer the image of the detected area is.
5. Click Save.
6. Optional: Select other area codes and repeat the steps above if you need to draw multiple fixed
areas.
8.4 Set OSD
You can customize OSD information on the live view.
Steps
1. Go to Configuration → Device Configuration → Text Overlay → Video.
Figure 8-4 Set OSD
2. Set OSD property, font size, alignment, etc.
3. Set the display content.
1) Check Camera Name and enter the name.
2) Check Display Date, and set the time and date format.
3) Check Display Week.
4. Optional: Check the display item(s) and enter the information in the text field(s).
To Next Page
Loading...