Parking Camera User Manual
35
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login.
RTSP Port
It refers to the port of real-time streaming protocol.
SDK Port
It refers to the port through which the client adds the device.
9.5 Set Bluetooth
You can enable Bluetooth to upload the parking space information to the platform.
Steps
Note
Some models do not support Bluetooth. The actual device prevails.
1. Go to Configuration → Device Configuration → Bluetooth.
Figure 9-5 Set Bluetooth
2. Check Enable Bluetooth.
3. Set the Bluetooth parameters according to the platform Bluetooth communication standard.
Broadcast Time Interval
It refers to the frequency of the sent broadcast frames of the Bluetooth module.
Rated Power
It refers to the signal strength received within 1 m range of the device.
Transmitted Power
The higher the transmitted power is, the further the receiving distance is.
4. Set Parking Lot ID, Parking Lot Floor Amount, etc. according to the actual parking lot
environment.
To Next Page
Loading...