Parking Camera User Manual
40
4) Optional: If you want to copy the arming schedule to other days, check the day(s) and click
Copy.
5) Click OK.
Note
The time of each period cannot be overlapped. Up to four periods can be set for each day.
Figure 11-2 Set Arming Schedule
5. Check Notify Surveillance Center to send an exception or alarm signal to the security center
when the motion detection occurs.
6. Click Save.
11.2 Set Exception Alarm
Set exception alarm when the network is disconnected or the IP address is conflicted.
Steps
1. Go to Configuration → Device Configuration → Exception → Exception.
Figure 11-3 Set Exception Alarm
2. Check the exception type to be alarmed.
3. Click Save.
To Next Page
Loading...