HIKVISION DS-TCP440-DB - Export Debug File

Parking Camera User Manual
47
1. Go to Configuration → Device Configuration → System Maintenance → Import Configuration
File.
2. Select Importing Method.
Note
If you select Import Part, check the parameters to be imported.
3. Click Browse to select the configuration file.
4. Enter the password which is set when the configuration file is exported, and click OK.
5. Click Import.
6. Click OK on the popup window.
Result
The parameters will be imported, and the device will reboot.
13.9 Export Debug File
The technicians can export the debug file to troubleshoot and maintain the device.
Steps
1. Go to Configuration → Device Configuration → System Maintenance → Export Debug File.
2. Click Export Debug.
3. Select the saving path, and enter the file name.
4. Click Save.