Barrier Gate User Manual
21
2.3.5 Install Fence Boom Pole
Installation Procedure
Steps
1. Install the pull rod joint component to the installation position of the host. Unfasten the joint
component pull rod.
Figure 2-23 Install Pull Rod Joint Component
2. Install the fence boom pole.
1) Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four
assembling bolts. Save the components and parts for the following installations.
Figure 2-24 Unscrew Assembling Bolts
2) Install the chuck to the boom pole with the bolts as shown in the figure below.
To Next Page
Loading...