Barrier Gate User Manual
25
components and parts for the following installations.
Figure 2-29 Unfasten Accessories of Main Boom Pole
2) Unfasten the cap nuts on the sub-boom pole and remove the screw, gaskets, and sub-
boom pole pull rod joint. Save the components and parts for the following installations.
Figure 2-30 Unfasten Accessories of Sub- Boom Pole
3) Force apart the sub-boom pole joint boards, and install the main boom pole. Make sure
that the installation holes on the joint boards of the sub-boom pole can clip into the black
bushing on the main boom pole.
Figure 2-31 Connect Main Boom Pole and Sub-Boom Pole
4) Put the sub-boom pole pull rod joint between the joint boards, and insert the screw
through the pull rod joint and gaskets, and fasten the cap nuts. Insert the other screw
through the other installation holes on the sub-boom pole joint boards and gaskets, and
fasten the cap nuts. Make sure that the black bushing on the sub-boom pole pull rod joint
To Next Page
Loading...