HIKVISION DS-TMG520-H/A/B - Connect to Traffic Signal Light

Barrier Gate User Manual
32
Barrier Gate
Control Box
Access ANPR
camera
Rising
Control
Falling
Control
1A
1B
2A
2B
AC34V
Nixie
Tube
Motor
Connection
Resistance
Connection
Encoder
Network
Interface
Green Light
Red Light
COM
Rise Stop
Fall Learn
Rising Control
+
Rising Control
-
Falling Control
+
Falling Control
-
Stopping Control
+
Stopping Control
-
+5V/GND
Rise via Hand Shank
Fall via Hand Shank
Stop via Hand Shank
GND
RS-485-B2
RS-485-A2
5V
GND
RS-485-B
RS-485-A
Induction Input
+
Induction Input
-
Protection Input
+
Protection Input
-
GND
+12V
Bollard Control
2+
Bollard Control
2 -
Bollard Control
1 -
Falling Limit Output
1+
Falling Limit Output
1 -
Rising Limit Output
1+
Rising Limit Output
1 -
Alarm Input
1 +
Alarm Input
1 -
Alarm Input
2 +
Alarm Input
2 -
12V_IN
LED_ARR1
LED_ARR2
GND
12V_OUT
Bollard Control
1 +
Figure 2-40 Connect to Access ANPR Camera
2.4.4 Connect to Traffic Signal Light
Connect the live line to the COM interface of the barrier gate. Connect the red light interface of
the barrier gate to the red traffic signal light, and connect the green light interface of the barrier
gate to the green traffic signal light. Connect the null line to the red and green traffic signal lights.
When the barrier gate is fully raised, the green light is on and vehicles can pass. When the barrier
gate is fallen, or is being raised or fallen, the red light is on and vehicles are prohibited.