HIKVISION DS-TMG520-H/A/B - Connect to Strip Light; Connect to Warning Light

Barrier Gate User Manual
41
Figure 2-49 Connect to Arrow Indicator
2.4.9 Connect to Strip Light
For the boom pole with strip light, connect the strip light to the barrier gate as shown below.
Red Line
GND
Green
PE
L
N
-V
+V
Yellow
V+
AC34V
Nixie
Tube
Motor
Connection
Resistance
Connection
Encoder
Network
Interface
Green Light
Red Light
COM
Barrier Gate
Control Box
Rise Stop
Fall Learn
Rising Control
+
Rising Control
-
Falling Control
+
Falling Control
-
Stopping Control
+
Stopping Control
-
+5V/GND
Rise via Hand Shank
Fall via Hand Shank
Stop via Hand Shank
GND
RS-485-B2
RS-485-A2
5V
GND
RS-485-B
RS-485-A
Induction Input
+
Induction Input
-
Protection Input
+
Protection Input
-
GND
+12V
Bollard Control
2+
Bollard Control
2 -
Bollard Control
1 -
Falling Limit Output
1+
Falling Limit Output
1 -
Rising Limit Output
1+
Rising Limit Output
1 -
Alarm Input
1 +
Alarm Input
1 -
Alarm Input
2 +
Alarm Input
2 -
12V_IN
LED_ARR1 LED_ARR2
GND
12V_OUT
Bollard Control
1 +
Figure 2-50 Connect to Strip Light
2.4.10 Connect to Warning Light
For the barrier gate with a warning light on the top of host, connect the warning light to the
barrier gate as shown below.