Barrier Gate User Manual
23
Figure 2-26 Fix Fence Boom Pole to Spindle Rod
4) Power off the device. Pull the fence boom pole to the horizontal position. Connect the pull
rod of the joint component to the joint 2 of the fence boom pole pull rod. Wrest the pull
rod of the joint component until the center boom poles are in the vertical position. Fasten
the fixing nuts of the joint 1 of the joint component pull rod and joint 2 of the fence boom
pole pull rod respectively.
5) Adjust the buffer rod height adjustment holes on the fence boom pole until the end of the
buffer rod is on the same horizontal surface with that of the refuge island.
To Next Page
Loading...