HIKVISION DS-TMG520-M/A/B - Peripheral Device Interfaces Introduction

Barrier Gate User Manual
72
B. Peripheral Device Interfaces Introduction
Open the top cover of host, and you can see the interfaces as shown below.
Figure B-1 Interfaces
Table B-1 Interface Description
Name
Description
Max.
Voltage
Max.
Current
Red Light
Connects to the red traffic signal
light.
AC 240 V/
DC 100 V
2 A
Green Light
Connects to the green traffic
signal light.
Rising Control +
Connects to control signals (relay)
to execute rising, falling, and
stopping command.
DC 12 V
/
Rising Control -
Falling Control +
Falling Control -
Stopping Control +
Stopping Control -
Rise via Hand Shank
Connects to hand shank control
tool to control the boom pole to
rise, fall, and stop remotely.
DC 12 V
/
Fall via Hand Shank
Stop via Hand Shank
+5V/GND
Hand shank power supply.
/
/