HIKVISION DS-TP50-12DT - Port Settings; Remote Access Configuration

DS-TP50-12DT Terminal Server User Manual
22
4.4.1 Port Settings
Step 1 Go to Configuration > Remote Configuration > Network Settings > Network Port Settings.
Figure 4-7 Network Port Configuration
Step 2 Edit the SDK Port, RTSP Port and HTTP Port.
 SDK Port: Port for platform to communicate with the device.
 RTSP Port: Port for getting stream from IP camera.
 HTTP Port: Port for browser to access the device.
Step 3 Click Save to save the settings.
Restart the device to activate the new settings.
4.4.2 Remote Access Configuration
Purpose:
SSH (Secure Shell) as a security protocol ensures network security for the remote accessing and
other network service. It prevents information leakage issues during remote management.
Step 1 Go to Configuration > Remote Configuration > Network Settings > Remote Access
Configuration.
Figure 4-8 Remote Access Configuration
Step 2 Check the checkbox of SSH.
Step 3 Click Save to enable it.