DS-TP50-12DT Terminal Server User Manual
23
4.4.3 HTTPS Configuration
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the following
steps to set the port number of https.
Example:
If you set the port number as 443 and the IP address is 192.0.0.64, you may access the device by
inputting https://192.0.0.64:443 via the web browser.
Step 1 Go to Configuration > Remote Configuration > Network Settings > HTTPS.
Step 2 Create the self-signed certificate or authorized certificate.
Figure 4-9 HTTPS Settings
Option 1: Create the self-signed certificate
1) Select the radio of Create Self-Signed Certificate.
2) Click the Create button to pop up the following dialog box.
Figure 4-10 Create Self-signed Certificate
3) Enter the Country, Hostname/IP, Validity, and other information.
4) Click OK to create the certificate.
Option 2: Install available certificate
To Next Page
Loading...
