DS-TP50-12DT Terminal Server User Manual
27
Figure 5-2 Time Settings
Step 2 Select Time Zone from the dropdown list.
Step 3 Select the clock synchronization mode as NTP, Manual Time Synchronization or GPS Time
Synchronization.
NTP
Enter NTP Server, NTP Port and Interval time.
Manual Time Synchronization
Enter the time and date in Set Time. Or you can select Synchronize with computer time.
5.3 DST Settings
Purpose:
DST (Daylight Saving Time) is the practice of advancing clocks during summer months by specified
hours so that evening daylight lasts specified hours longer while sacrificing normal sunrise times.
Step 1 Go to Configuration > Remote Configuration > Device Parameters > Time Settings.
Figure 5-3 DST Settings Interface
To Next Page
Loading...
