HIKVISION DS-TP50-12DT - Image Collage Parameters; Collaged Picture Text Overlay; Interaction Configuration

DS-TP50-12DT Terminal Server User Manual
36
7.4 Image Collage Parameters
Purpose:
Configure image collage layout and other parameters.
Step 1 Go to Configuration > Remote Configuration > Camera Settings > Image Collage
Parameters.
Step 2 Select camera to configure.
Step 3 Set Image Collaging as Enable.
Step 4 Select layout for 2 Captured Pictures and 3 Captured Pictures.
Step 5 Configure Maximum Size of Picture (KB) and Original Picture Zoom Multiple.
 Maximum Size of Picture (KB): The maximum size of collaged pictures.
 Original Picture Zoom Multiple: The zoom in times for pictures to collage.
Step 6 Click Save.
7.5 Collaged Picture Text Overlay
Purpose:
Overlay text on collaged pictures.
Step 1 Go to Configuration > Remote Configuration > Camera Settings > Collaged Picture Text
Overlay.
Step 2 Select camera to configure.
Step 3 Select Text Overlay Position.
Step 4 Select Text Overlay Type.
Step 5 Set text parameters including Initial Top Margin, Initial Left Margin, Character Size,
Character Color, Background Color, Space, and Position Percentage of Line Break.
 Initial Top Margin: Text position from top margin.
 Initial Left Margin: Text position from left margin.
 Position Percentage of Line Break: Text will switch to next line when the percentage between
text length and picture width reaches the set value.
Step 6 Click Save.
7.6 Interaction Configuration
Purpose: