DS-TP50-12DT Terminal Server User Manual
38
Figure 7-5 Alarm Output
Step 2 Select Alarm Output No. in the dropdown list.
Step 3 Select the Dwell Time. Thus the device sends out alarm output signal for the set time.
Step 4 Enter Alarm Name.
Step 5 Click the button to configure the arming time. The alarm output signal is only
available in arming time.
For detailed steps, turn to step 5 to 8 in 8.7 Alarm Input Recording Settings.
Step 6 Click Save to save the settings.
To Next Page
Loading...
