DS-TP50-12DT Terminal Server User Manual
39
Chapter 8 Record and Capture Settings
8.1 HDD Initialization
Purpose:
Initialize the HDD before you use it.
HDD amount varies according to different models. You can refer to specification for details.
Step 1 Go to Configuration > Remote Configuration > HDD Management > Basic Settings.
Step 2 Check the checkbox of HDD to initialize.
Step 3 Click Init to initiate it.
Figure 8-1 HDD Management
8.2 Video and Picture Quota
Purpose:
You can set the maximum capacity for saving picture.
Step 1 Go to Configuration > Remote Configuration > HDD Management > Advanced Settings.
Figure 8-2 Advanced Settings
To Next Page
Loading...
