DS-TP50-12DT Terminal Server User Manual
43
Figure 8-6 Holiday Settings
Step 2 Click the icon after a holiday to enter Edit Holiday interface.
Up to 32 holidays can be configured.
Figure 8-7 Edit Holiday
Step 3 Edit Holiday Name.
Step 4 Check the Enable Holiday checkbox.
Step 5 Select holiday Type as By Date, By Week, or By Month.
Step 6 Enter Start Date and End Date.
Step 7 Click OK to save the holiday and go back to upper menu.
8.6 Record Schedule Settings
Purpose:
Set the record schedule as continuous recording or alarm triggered recording, and then the camera
automatically starts/stops recording according to the configured schedule.
Step 1 Go to Configuration > Remote Configuration > Camera Settings > Record Schedule.
To Next Page
Loading...
