DS-TP50-12DT Terminal Server User Manual
47
Figure 8-11 Arming Time
1) Select a day in a week to configure.
2) Up to 8 time segments are provided. Set the Start Time and End Time for one or more
time segments.
3) Select day(s) in Copy to Week and click Copy, thus to copy the schedule to other days.
Or repeat the step 1) and 2) to configure arming time for other days.
Step 6 Click to configure linking method.
Step 7 Set Alarm Linking, Trigger Alarm Output, Alarm Linked Recording, and PTZ Linking
according to your needs. Once an alarm occurs, the selected linking method will be
triggered.
Step 8 Configure the alarm record schedule. For detailed steps, please refer to 8.4 Video
Parameter Settings.
Step 9 Click Save to save the settings.
To Next Page
Loading...
