DS-TP50-12DT Terminal Server User Manual
58
Chapter 12 Status Information
12.1 Server Status
Purpose:
You can view the network status, server working status, and network uploading status.
Step 1 Go to Configuration > Remote Configuration > Status Information > Server Status.
Figure 12-1 Status
Step 2 Click Network Status, Working Status, and Network Uploading Status to view system status.
Network Status: Shows all network interfaces status.
Working Status: Displays the system working status.
Network Uploading Status: Shows the four uploading hosts status.
12.2 Camera Status
Purpose:
You can view the Traffic Flow Statistic information, Front-end Device Status, and Camera Status.
The function is only available when the connected camera supports traffic flow statistics.
Before you start:
Select the Camera Type as Intelligent Traffic Camera. For details, please refer to 7.3 Monitoring
Spot Information Settings.
Step 1 Go to Configuration > Remote Configuration > Status Information > Camera Status.
To Next Page
Loading...
