UM IPC-4300H 040320NA 123
• The Tester is in Auto Range status by default. Click AC Auto Range.
• Manual range can be selected. Press the Near key to restore Auto
Range.
• Manual Ranges: 0.000 V 6.600 V, 00.00 V 66.00 V, 000.0 V
660.0 V, 000.0 mV 660.0 mV
Figure 122, Voltage Measurement Lead Setup
DC Current Measurement (Only Manual Range)
Turn off the tested circuit and connect the meter to the
circuit for measurement.
• Connect the black test lead to the COM port and the red test lead
to the mA port for a maximum 660 mA current. For a maximum of 10
A, move the red lead to the 10 A port.
• Select A and enter the DC Current Measurement section. The
screen displays “DC Current”, and manual range can be selected.
• Manual Ranges: 0.000 mA 6.6 mA, 00.00 mA 66.00 mA, 000.0
mA 660.0 mA, 00.00 A 10.00 A (use 10 A socket)
• Select the range to enter the current measurement section.
To Next Page
Loading...