User Manual of iVMS-5200 Control Client
14
Configuring the Pattern
Patterns can be set to record the movement of the PTZ.
Perform the following steps to add a pattern:
1. Click the Pattern button to enter the PTZ pattern configuration panel.
2. Click to start recording of this pattern path.
3. Use the direction buttons and other buttons to control the PTZ movement.
4. Click to stop and save the pattern recording.
5. Click the icon to call the pattern. To stop calling the pattern, click .
Note: Only one pattern can be configured, and the newly-defined pattern will overwrite the previous
one.
Configuring the Patrol
A patrol is a scanning track specified by a group of user-defined presets, with the scanning speed
between two presets and the dwell time at the preset separately programmable.
Before you start:
Two or more presets for one PTZ camera need to be added.
Perform the following steps to add and call a patrol:
1. Click the Patrol button to enter the PTZ patrol configuration panel.
2. Select a path number from the drop-down list.
To Next Page
Loading...