HIKVISION iVMS-5200 - Page 18

User Manual of iVMS-5200 Control Client
17
The following buttons are available on the local playback page:
CIF/4CIF
Display the video at CIF/4CIF resolution.
Full Screen
Display the local playback page in full-screen mode.
Close
Close the local playback page of the record file.
Pause/Play
Pause / resume the playback of the record file.
Stop
Stop the playback of the record file.
Speed
Set the playback speed.
Single Frame
Play back the record file frame by frame.
Digital Zoom
Enable the digital zoom function. Click again to disable.
Enable/Disable Audio
Click to enable/disable the audio in the local playback.
Capture
Capture the picture of the playback video.
Capturing Picture in Live View
Steps:
1. Move the mouse pointer to the display window in live view to show the toolbar.
2. Click the icon in the toolbar of the display window or on the right-click Live View
Management Menu.
A small window of the captured picture will be displayed to notify whether the capturing
operation is done or not.
Note: The saving path of the captured pictures can be set on the Local Configuration interface. For
details, see Section 10.2 File Saving Path Settings.
Viewing Captured Pictures
The pictures captured in live view are stored in the PC running the Control Client. You can view the
captured pictures if needed.
Steps:
1. Click File->Open Local Picture to open the Captured Picture page.
2. Select the camera to be searched from the Area list.
3. Click the icon to specify the start time and end time for the search.