User Manual of iVMS-5200 Control Client
21
Right-click on the live view window and select Start Two-way Audio. Two-way audio function enables
the voice talk of the camera. You can get not only the live video but also the real-time audio from the
camera. This two-way audio can be used for only one camera at one time.
Camera Status
Right-click on the live view window and select Camera Status. The camera status, such as recording
status, signal status, connection number, etc., can be detected and displayed for check. The status
information refreshes every 3 minutes.
Arming Control
Right-click on the live view window and select Arming Control. The status of the enabled event
detection (e.g., motion detection, video loss) displays, such as arming status, alarm name and alarm
type. You can click Disarm / Disarm All to disable the event detection and set the disarming duration.
You can also click Arm / Arm All to enable the event detection.
To Next Page
Loading...