HIKVISION iVMS-5200 - 4.2 Hot Spot Function

User Manual of iVMS-5200 Control Client
31
map preview mode.
E-map Toolbar in Map Editing Mode:
E-map Toolbar in Map Preview Mode:
The following table introduces the buttons on the e-map page:
Add Map
Add a new map.
Modify Map
Edit the map information, including the map name and file path.
Delete Map
Delete the current map.
Add Camera Hot
Spot
Add a camera as the hot spot on the map.
Add Alarm Input Hot
Spot
Add an alarm input sensor as the hot spot on the map.
Add Alarm Output
Hot Spot
Add an alarm output device as the hot spot on the map.
Add Access Control
Hot Spot
Add an access control device as the hot spot on the map.
Add Hot Region
Add an existing map as the hot region on the map.
Add Label
Add a label with description to the map, hot spot or hot region.
Delete
Delete the selected hot spot or hot region.
Clear Alarm Info
Clear the alarm information displayed on the map.
Refresh
Refresh all the e-map information.
Preset
Display the added presets of the all the maps.
Save as Preset
Save the current scene as a preset.
Previous
The client can remember the switching records of the maps. Click to
go to the previous record.
Next
The client can remember the switching records of the maps. Click to
go to the next record.
Capture & Edit
Capture the current scene including the elements (e.g., camera, alarm
input), edit on the captured picture, and save it to the local PC.
4.2 Hot Spot Function
Purpose:
The cameras, alarm inputs, alarm outputs and access control can be added on the map and are called
the hot spots. The hot spots show the locations of the cameras, alarm inputs, alarm outputs and
access control, and you can also get the alarm information of the surveillance scenarios through the
hot spots.