User Manual of iVMS-5200 Control Client
32
4.2.1 Adding Hot Spots
Adding Cameras as Hot Spots
Steps:
1. Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2. Select a map and click the icon in the toolbar to open the Add Hot Spot dialog box.
3. Check the checkbox to select the camera(s) to be added. You can also search the camera by
entering the key words in the Linked Camera filed.
4. Optionally, you can edit the hot spot name, select the hot spot icon, choose the name color and
add description to the hot spot. You can also click Icon Management to upload the local picture
file to set it as the customized icon.
Note: The picture format of the icon can only be *.png, *.jpg, or *.bmp and the picture size
should be 32*32 pixels.
5. Click OK to save the settings. The camera icons are added on the map as hot spots. You can
click-and-drag the camera icons to move the hot spots to the desired locations. Click to select the
hot spot and you can see and edit the settings on the Property panel.
Adding Alarm Inputs as Hot Spots
Steps:
1. Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2. Select a map and click the icon in the toolbar to open the Add Hot Spot dialog box.
3. Check the checkbox to select the alarm input(s) to be added. You can also search the alarm input
by entering the key words in the Linked Alarm Input filed.
4. Optionally, you can edit the hot spot name, select the hot spot icon, choose the name color and
add description to the hot spot. You can also click Icon Management to upload the local picture
file to set it as the customized icon.
Note: The picture format of the icon can only be *.png, *.jpg, or *.bmp and the picture size
should be 32*32 pixels.
5. Click OK to save the settings. The alarm input icons are added on the map as hot spots. You can
click-and-drag the alarm input icons to move the hot spots to the desired locations. Click to select
the hot spot and you can see and edit the settings on the Property panel.
To Next Page
Loading...