User Manual of iVMS-5200 Control Client
35
4.2.3 Previewing Hot Spots
Steps:
1. Click the Map Preview button in the E-map toolbar to enter the map preview mode.
2. Move your mouse to the hot spot and a window pops up on which the related functions of the
hot spot display.
For camera hot spot: You can select to check the live view of the camera, view its description,
configure the arming control, view and save the log information of the history alarm.
For alarm input hot spot: You can view its description, configure the arming control, view and
save the log information of the history alarm.
For alarm output hot spot: You can enable or disable the linked alarm output.
For access control hot spot: You can select to open the door, close the door, keep the door
remain open, keep the door remain closed, check the live view of the camera, view its
description, configure the arming control, view and save the log information of the history
alarm.
Or you can right-click a hot spot and the following functions available on the right-click menu:
For camera hot spot: You can select to check the live view of the camera, configure the arming
control, view and save the log information of the history alarm, clear all the alarm information
of the camera.
For alarm input hot spot: You can select to configure the arming control, view and save the log
information of the history alarm, clear all the alarm information of the camera.
For alarm output hot spot: You can enable or disable the linked alarm output.
For access control hot spot: You can select to open the door, close the door, keep the door
remain open, keep the door remain closed, check the live view of the camera, view its
description, configure the arming control, view and save the log information of the history
alarm, clear all the alarm information of the camera.
3. If there is any alarm triggered, the hot spot icon changes its color to red (e.g., ) and twinkles.
You can move your mouse to it to check the alarm information.
For camera hot spot, you can also perform the following steps to check its live view.
1. Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2. Click to select the camera hot spot icon on the map and the Live View panel displays on the right
panel.
3. Click to expand the Live View panel and you can see the live video of the linked camera.
Arming Control
Purpose:
Arming control provides the fucntion to arm and disarm hot spots, clear alarm information, and
enable and disable the alarm outputs.
Steps:
1. On the pop-up window or right-click menu of the hot spot, click or select Arming Control to
activate the Arming Control window.
2. The status of the enabled event detection (e.g., motion detection, video loss) displays, such as
arming status, alarm name and alarm type. You can click Disarm / Disarm All to disable the event
To Next Page
Loading...