User Manual of iVMS-5200 Control Client
37
4.3 Hot Region Function
Purpose:
The hot region function links a map to another map. When you add a map to another map as a hot
region, an icon of the link to the added map is shown on the main map. The added map is called child
map while the map to which you add the hot region is the parent map.
Note: A map can only be added as the hot region for one time.
4.3.1 Adding Hot Regions
Before you start:
At least 2 maps have been added. Refer to Chapter 4.1 Adding an E-map for detailed configuration
about adding maps.
Steps:
1. Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2. Select an added map as the parent map.
3. Click the icon in the toolbar to open the Add Hot Region dialog box.
4. Check the checkbox to select the child map(s) to be linked.
5. Optionally, you can edit the hot region name, and select the hot region color and icon, and add
description to the hot region. You can also click Icon Management to upload the local picture file
to set it as the customized icon.
Note: The picture format of the icon can only be *.png, *.jpg, or *.bmp and the picture size
should be 32*32 pixels.
6. Click OK to save the settings. The child map icons are added on the parent map as the hot regions.
You can click-and-drag the child map icons to move the hot regions to the desired locations.
To Next Page
Loading...