User Manual of iVMS-5200 Control Client
41
double-click the camera name after selecting the display window to start the live view.
4. The live video will be displayed and the read license plates will be shown on the right of the
displaying window.
5. You can double-click on the recognized license plate to check the details of it.
Live View Toolbar:
The following buttons are available:
Stop the live view of all cameras.
Turn off/on the audio in live view.
Set screen layout mode for live view.
Display the live view in full-screen mode. Press ESC key to exit.
Right-click on the display window in live view to open the Live View Management Menu:
The following items are available on the right-click Live View Management Menu:
Stop the live view in the display window.
Capture the picture in the live view process.
Capture the current picture and then print the picture.
Start/Stop the manual recording. The record file is stored in the PC.
Click to enable/disable the audio in live view.
Display the status of the camera in live view, including the recording
To Next Page
Loading...