HIKVISION iVMS-5200 - Chapter 6 Alarm Center

To Next Page

To Previous Page

User Manual of iVMS-5200 Control Client

Chapter 6 Alarm Center

Purpose:

The alarm information (e.g., motion detection alarm information) received by the iVMS-5200 Control

Client displays. You can check the detailed information of the alarm, manage the alarm information,

etc.

Note: You should configure the event settings via Web Manager before you can check the related

alarm information and linkage actions via Control Client. For detailed configuration of event settings,

please refer to User Manual of iVMS-5200 Professional Web Manager.

Click the icon on the control panel,

or click View->Alarm Center to open the Alarm Center page.

Alarm Center Page

1 Alarm List

2 Alarm Toolbar

3 Switch Alarm and Information Tab

4 Alarm Handling Bar

Refer to the following table for the description of the icons on the alarm handling bar:

Clear Alarm Info

Clear all the alarm information.

Enable Audio

Enable audible warning of the Control Client when alarm is

triggered.

Enable Alarm Triggered

Pop-up Image

The image of the selected camera(s) pops up when alarm is

triggered.

Manual Alarm

Set manual alarm. You can edit alarm description, set the alarm level

and send it to the specified user