User Manual of iVMS-5200 Control Client
52
Chapter 10 Local Configuration
Purpose:
The general parameters, file saving paths, keyboard and joystick shortcuts and alarm sounds can be
configured.
Click the icon on the control panel,
or click Tool->Local Configuration to open the Local Configuration page.
Note: You can click Default Value to restore the defaults of all the local configurations.
10.1 General Settings
Purpose:
The frequently-used parameters, including the view scale, network performance, etc., can be set.
Steps:
1. Open the Local Configuration page.
2. Click the General tab to enter the General Settings interface.
3. Configure the general parameters. For details, see Table 10.1 General Parameters.
4. Click Save to save the settings.
To Next Page
Loading...