HIKVISION iVMS-5200 - 10.2 File Saving Path Settings

User Manual of iVMS-5200 Control Client
53
Table 10.1 General Parameters
Parameters
Descriptions
View Scale
The view scale of the video in live view or playback. It can be set as Full
Screen, 4:3, 16:9 or Original Resolution.
Network Performance
According to the current network conditions to set it as Normal, Better or
Best.
Play Performance
The play performance of the live video. You can set is as Shortest Delay or
Self-adaptive according to the hardware performance of the PC.
Picture Format
Set the file format for the captured pictures during live view or playback.
Enable Screen Toolbar
Display
Show the toolbar on each display window in live view or playback when
the mouse over the window.
Enable Auto-login
Remember the user name and password of the iVMS-5200P and log into
the Control Client automatically.
Prioritize the Playback
of Record Files on
Storage Server
Play back the video files recorded on the storage server preferentially.
Otherwise, play back the video files recorded on the local device.
Auto-change Stream
Type
Change the stream type automatically in live view according to window
division and the size of the display window.
Record Two-way Audio
Record the audio during two-way audio.
10.2 File Saving Path Settings
Purpose:
The manual recording files, the captured pictures during live view and playback and the audio file
recorded during two-way audio are stored on the local PC. The saving paths of these files can be set.
Steps:
1. Open the Local Configuration page.
2. Click the File tab to enter the File Saving Path Settings interface.
3. Click the icon and select a local path for the corresponding files.
4. For FTP settings, enter the IP address, port No., the login user name and password of the FTP
server, set a saving path for the uploaded pictures and video files.
5. Click Save to save the settings.