User Manual of iVMS-5200 Control Client
7
Chapter 2 Live View
2.1 Login
When opening iVMS-5200 Control Client, you can login with the user name and password of
iVMS-5200P.
Two kinds of user (normal user and domain user) are supported for accessing the iVMS-5200P. Please
refer to the User Manual of iVMS-5200 Professional Web Manager for the detailed introduction.
Option 1: Login with Normal User
Steps:
1. Double-click on the desktop to run the Control Client.
2. Select Normal Login and input the normal user name and password of the iVMS-5200P.
Notes:
By default, the user name of the iVMS-5200P is admin and the password is 12345.
You are highly recommended to change the default password right after the first login to
avoid safety problem. Please refer to the User Manual of iVMS-5200 Professional Web
Manager for the operation of changing password.
3. Optionally, check the checkbox Remember Password to keep the password.
4. Check the checkbox Enable Auto-login to log into the software automatically.
5. Set the address and port No. of the CMS.
Note: If these fields are not displayed, click Show Server Address to show them. You can also click
Hide Server Address to collapse these fields.
Server Address: Enter the address of the CMS that you want to connect to.
Port No.: Enter the port No. of the CMS. By default, it’s 80.
6. Click Login to enter the Control Client.
Option 2: Login with Domain User
Steps:
1. Click Domain Login tab and select the domain user.
2. (Option 1) If you select your own domain account (the current user account that log into your PC),
you can check the Enable Auto-login checkbox to log into the software automatically next time.
3. (Option 2) If you select other user, enter the user name and password. Optionally, you can check
To Next Page
Loading...