Network Video Recorder User Manual
122
Figure 12-6 Region Entrance Detection
Step 3 Select a Camera to configure.
Step 4 Check Enable Region Entrance Detection checkbox.
Step 5 Optionally, check Save VCA Picture checkbox to save the captured pictures of region
entrance detection.
Step 6 Follow the steps to set the detection rules and detection areas.
7) Select an Arming Region to configure. Up to 4 regions are selectable.
8) Drag the sliders to set Sensitivity.
Sensitivity: The higher the value is, the more easily the detection alarm can be triggered.
Its range is [0-100].
9) Click Draw Region and draw a quadrilateral in the preview window by specifying four
vertexes of the detection region.
Step 7 Configure Arming Schedule and Linkage Action.
Step 8 Click Apply.
12.6 Region Exiting Detection
Purpose:
Region exiting detection function detects objects that exit from a pre-defined virtual region.
Step 1 Go to System > Event > Smart Event.
To Next Page
Loading...
