Network Video Recorder User Manual
134
Check Enable DHCP to obtain IP settings automatically if a DHCP server is available in the
network.
Valid range of MTU value is 500 to 9676.
Step 4 Click Apply.
14.2 Configure Hik-Connect
Purpose
Hik-Connect provides mobile phone application as well as service platform to access and manage
your connected devices with remote access to the video security system.
Step 1 Go to System > Network > Advanced > Platform Access.
Figure 14-2 Hik-Connect Settings
Step 2 Check Enable and a Service Terms window will pop up. Create your verification code, check to
agree to the service terms and click OK.
To Next Page
Loading...
