Network Video Recorder User Manual
46
Step 1 In the live view mode, click the to enter the 3D positioning mode.
Step 2 Operate the zoom in/out in the image.
Zoom in
Use the left key of mouse to click on the desired position in the video image and drag a
rectangle area in the lower right direction to realize zoom in.
Zoom out
Use the left key of mouse to drag a rectangle area in the upper left direction to move the
position to the center and enable the rectangle area to zoom out.
5.1.3 Live View Strategy
Step 1 In the live view mode, click to enter the digital zoom operation interface in full screen
mode.
Step 2 Select the live view strategy to Real-time, Balanced or Fluency.
5.2 Target Detection
In live view mode, the target detection function can be used to detect the human
motoion/face/vechicle/human body during the last 5 seconds and the following 10 seconds.
Step 1 In the live view mode, click Target Detection tab to enter the target detection interface.
Step 2 Check the checkbox of the icons to select different detection types: motion detection ( ),
vehicle detection ( ), face detection ( ) and human body detection ( ).
Step 3 You can select the historical analysis ( ) or the real-time analysis ( ) to obtain the
results.
To Next Page
Loading...
