Network Video Recorder User Manual
47
Figure 5-2 Target Detection
Result:
The smart analysis results of the detection are displayed in the list. Optionally, click a result in
list to play the related video.
5.3 Configure Live View Settings
Live View settings can be customized according to different needs. You can configure the output
interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.
Step 1 Go to System > Live View > General.
Figure 5-3 Live View-General
Step 2 Configure the live view parameters.
Video Output Interface: Select the video output to configure.
Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc.
To Next Page
Loading...
