Need help?Do you have a question about the Hill Audio DX1500 and is the answer not in the manual?
General| S/N Ratio | > 100 dB |
|---|---|
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Input Impedance | 10kΩ |
| Protection | Short circuit |
| Connectors (Input) | XLR |
| Connectors (Output) | Binding posts |
Details the unique transformer coupled driver stage and 'Super A' configuration for linear response.
Explains the multi-position control for setting input voltage to achieve rated power without clipping.
Covers accepted connectors (XLR, 1/4") and linking options for input signals.
Describes the mono bridging mode, connecting both channels for single input.
Explains the function and position of the AC circuit breaker.
Details the ground isolation switch for hum problems and AC ground connection.
Explains servo-controlled fan speed based on temperature, starting at 40°C and full at 70°C.
Discusses normal operation temperature and heatsink casing acting as a heatsink.
Describes the protection relay that shuts down the amplifier due to overdriving, short circuits, or malfunction.
To Next Page